Floor Tile Cleaning Archives - Stirling Tile Doctor

Stained Victorian Tiled Vestibule Floor Renovated in Alloa

This client from Alloa has a small Victorian Tiled vestibule at the entrance to their property that needed attention. The lovely Victorian tiles had been stained with white paint during decorating by the previous owners. They had managed to clean most of the paint off themselves but this had stripped off the sealer in the process leaving it vulnerable to ingrained dirt resulting in the dull appearance you see now. Keen to have the vestibule looking its best the client contacted us to address the issue and restore the tiles to their former condition.

Stained Victorian Floor Tiles Before Cleaning Alloa Vestibule

An inspection of the tiles revealed no damp proof membrane beneath the floor, likely due to the age of the property. Using a lot of water on a floor without a DPM can encourage the appearance of efflorescence (salt deposits) as the floor dries so we opted to use gel products instead of diluted strippers and cleaners. This approach helps reduce excess moisture during the cleaning process.

Cleaning a Victorian Tiled Entrance Vestibule in Alloa

After adding protection to the adjacent skirting work started on cleaning the tiling using Tile Doctor Oxy-Gel which was spread over the tiles and allowed to soak in for 15 to twenty minutes. This dwell times give the product time to break down the soiling and soften other contaminates. The product was then scrubbed into the floor using a coarse 200-grit pad fitted to a rotary buffer, passing over each tile at least four times to bring the dirt and soiling to the surface where it was removed with a wet vacuum. The floor was then given a rinse with water to remove any remaining soiling and extracted with the wet vacuum.

To complete the restorative cleaning process, the tiles were given and acid rinse using Tile Doctor Acid Gel which was left to soak in got five to ten minutes before being scrubbed in, this time using a black pad. This product neutralises the alkaline cleaners used earlier and will also dissolve any salts that may be present in the floor. Next, I extracted the soiled solution and thoroughly rinsed the tiles with cloths and water to minimize moisture levels. After a final vacuum the floor was left to dry off overnight.

Sealing a Victorian Tiled Vestibule in Alloa

The next day, the floor was tested to ensure the Victorian tiles were dry enough for sealing. This is an important step as applying sealer to a damp floor will lead to an inconsistent finish.

The floor was dry and so ready for sealing with Tile Doctors Colour Grow, a tough colour enhancing breathable impregnator that’s well-suited for an entrance hall that will see heavy foot traffic and wet shoes. Two coats were applied, with any excess removed with clean cloths five minutes after each application. A forty-minute drying time was allowed between coats and then after two hours, a water test confirmed the sealer was working properly. The sealer becomes walkable in four hours and fully cured within twenty-four hours.

Victorian Tiled Floor After Restoration Alloa Vestibule

It’s crucial to maintain the floor properly and using regular tile cleaner on sealed tiles is inadvisable, as they can strip the sealer over time. Instead, a bottle of Tile Doctor Neutral Tile Cleaner was provided for cleaning the floor. This pH-neutral cleaner effectively removes dirt and grime without damaging the sealer, helping to extend the sealer’s lifespan and protect the tiles.

Professional Restoration of a Victorian Tiled Entrance Hallway in Stirling

Victorian Tiled Floor Restoration Balloch Loch Lomond

Glue-Stained Victorian Tile Floor Restored at Balloch Loch Lomond

The client in Balloch at the South end of Loch Lomond had purchased a property with a Victorian tiled floor hidden beneath worn carpet in the entrance hall. The property was in the process of being converted into a residential home where my client planned to live.

Victorian Tiled Floor Covered in Carpet Glue and Cement in Balloch Loch Lomond

The Victorian floor was well-preserved however the tiles were obscured by thick, stubborn carpet glue, as well as soiling and a chunk of concrete at one of the doorways. To add to the challenge, two of the tiles were damaged and needed repair. My client had attempted to remove the carpet glue using various cleaners and paint strippers, but none had been effective.

Victorian Tiled Floor Covered in Cement in Balloch Loch Lomond

As per usual practice I went over to survey the floor and work out a detailed restoration plan that would transform the entrance hall into a striking focal point of the property. I used the plan to work out a quote which was accepted and a date set for my return.

Cleaning and Repairing a Victorian Tiled Hallway

Work began by focusing on removing the hardened glue by carefully scrapping off as much as possible by hand. Then a mixture of Tile Doctor’s Oxy-Gel and Nanotech HBU Remover was applied and let to sit for twenty minutes. This combination started breaking down the glue, allowing most of what remained to be scraped off, leaving only small deposits. The process was repeated and the floor further scrubbed using a Black pad fitted to a rotary buffer machine to remove the last of the glue and leave the floor clean.

The next task was to remove the cement covering the tiles at one of the doorways, I suspect this had been added to resolve an issue at some point in the property’s long history. The cement was carefully chiselled out to avoid damaging the adjacent tiles. The meticulous nature of this process took approximately 30 minutes to complete, with frequent inspections to check for any tile damage.

Victorian Tiled Floor During Cement Removal in Balloch Loch Lomond

Fortunately, the cautious approach ensured that no tiles were harmed. However, a thin layer of concrete remained on the tiles, which was subsequently removed using water and a 200-grit coarse pad fitted to the buffing machine.

Since the floor lacked a damp-proof membrane, the next step was to counter any potential efflorescence (salt issues) trapped in the floor. To accomplish this, Tile Doctor’s Acid Gel was applied by brushing it across the entire floor. The gel was allowed to seep into the tiles for ten minutes, then scrubbed in with a deck brush, adding a little water as we went. Once completed a wet vacuum was used to lift the soiled solution.

Once finished the floor was thoroughly rinsed with water to remove any trace of product or remaining dirt and then vacuumed again. Finally, the floor was left to dry out overnight.

Victorian Tiled Floor After Cement Removal in Balloch Loch Lomond

Prior to sealing, we had to repair two tiles. One tile was brown, while the other was white. We used epoxy resin sticks to complete the repairs. To achieve a matching brown colour, we mixed various resin sticks. Fortunately, the white tile repair was straightforward.

Sealing a Victorian Tiled Hallway

The next day, we tested the floor to ensure it was dry enough for the sealer application. Tile Doctors Colour Grow sealer was chosen as it is a tough, water-repellent product that also enhances the tile colour. Two coats were applied forty minutes apart to allow the first coat to fully dry and soak into the tiles.

Victorian Tiled Floor After Restoration Balloch Loch Lomond

The work took two days and completely restored the floor back to its original condition much to the client of my client.

For aftercare of sealed floors like this one we recommended the pH-Neutral Cleaner from Tile Doctor which will keep the floor clean without affecting the sealer.

Professional Restoration of a Victorian Tiled Hallway in Sterling

Glue-Stained Victorian Tile Floor Restored at Balloch Loch Lomond Read More »